Hope 7.4v Li Ion Battery Charger for Vision Lights

Hope 7.4v Li Ion Battery Charger for Vision Lights: Replacement UK mains battery charger for all Hope Vision Lights For Hope 7.4V Li Ion Battery Packs only

Price: £37.52

Hope Vision 1 LED Front Light

Hope Vision 1 LED Front Light: This fantastic little light may just be the best addition to your night riding you can make as it a single high powered LED that pushes out 240 lumens on max power! This is the sort of output a lot of lights with more LEDs, bigger batteries and a greater cost can offer. The CNC machined lamp body mounts to the new reinforced nylon handlebar bracket, which fits both standard and oversize bars with the clever use of removable rubber plugs. The bracket also allows for lateral adjustment of the lamp whilst riding. The power is provided by 4 AA size batteries. These can be of your choice, and we leave that up to you. As an example though, you can expect to get an average of 3 hours run time on max power from a typical rechargeable battery. The light has a simple on/off/mode switch on the top. This has a new cycle program which turns the light on in 'low' mode and cycles through to the higher settings with each button press. This gives better control of the light in tricky situations when more light is needed quickly. As well as the universal handlebar clamp, a new reinforced nylon helmet mount is also included, along with a wrist lanyard, as well as ample velcro fastenings. This makes the light truly adaptable. Perfect for bikes, outdoor enthusiasts and people looking for a high quality, high powered light for other nocturnal activities! CNC machined in Barnoldswick, England Light Source: 1 x High Power LED Intensity: 240 Lumens – Max Beam: 1 x Spot (+/- 4 Deg) Colours: Black, Red, Blue and Gunsmoke Mounting: Uni-Handlebar, Helmet or Wrist Strap Battery: 4 x AA (not inc) Charge Time: n/a Weight: 110g, complete without batteries Power Levels: 4 (+ flash) Takes 4 AA batteries which can be rechargeable or replaceable cells In the box: Light Handlebar mount Helmet mount Wrist lanyard

Price: £81

Hope Vision 4 LED Endurance Front Light

Hope Vision 4 LED Endurance Front Light: The all new 4 LED boasts some serious output. This impressive new light offers nearly twice the lumen output of its HID predecessor, now 960 lumens on max power! Endurance version includes 2 x 2 cell battery packs. Combine this with over 2 hours of burntime and it's a winning combination. The CNC machined lamp body mounts to the new reinforced nylon handlebar bracket, which fits both standard and oversize batrs with the clever use of removable rubber plugs. The bracket also allows for lateral adjustment of the lamp whilst riding. The 7.4v Li-ion battery pack is the same as the 2 LEDs 'Epic' version – with its 4 cells giving 5200 mAh. The battery has built in charge, discharge and short circuit protection. The connectors are fully sealed and totally waterproof (IP67). The light has a simple on/off/mode switch on the back. This has a new cycle program which turns the light on in 'low' mode and cycles through to the higher settings. This gives better control of the light in tricky situations when more light is needed quickly. In tests the Li-ion battery will last for up to 35hrs on low and 2hrs 15min on max, with the intelligent charger returning that in just 6 hours. The PVC case is small enough to fit under most stems, top tube junctions or slip into a hydration pack or jersey pocket. The 4 LED now utilises 'thermal throttling' techniques to increase the longevity of the LEDs and prevent damage to the electrical circuit due to overheating. This works by monitoring the temperature of the aluminium heatsink and restricting the power when it reaches a critical level, thereby keeping the casing at an acceptable temperature for handling while providing extended battery burn times by reducing the amount of energy lost through heat. As well as the universal handlebar clamp, a new reinforced nylon helmet mount is also included as well as ample velcro fastenings. This light is perfect for Endurance events, 12/24hr racing and night riding alike. It gives more light than you've ever had before with sensible run times and a low system weight. CNC machined in Barnoldswick, England Light Source: 4 x High Power LED Intensity: 960 Lumens – Max Beam: 3 x Spot (+/- 5 Deg), 1 x Flood (+/- 15 Deg) Mounting: Uni-Handlebar, Helmet, Head Harness Battery: 7.4v Li-Ion 5200mAh Charge Time: 6hrs Weight: 540g Power Levels: 4 (+ flash) Burn Time: 2 HR 15 MIN – 35HR+ Endurance version includes 2 x 2 cell battery packs. In the box: Light 2 x 5200 mAh battery packs Handlebar mount Helmet mount Power lead Smart Charger with UK plug

Price: £324

Hope Vision 4 LED Front Light

Hope Vision 4 LED Front Light: The all new 4 LED boasts some serious output. This impressive new light offers nearly twice the lumen output of its HID predecessor, now 960 lumens on max power! Standard version includes 1 x 2 cell battery pack. Combine this with over 2 hours of burntime and it's a winning combination. The CNC machined lamp body mounts to the new reinforced nylon handlebar bracket, which fits both standard and oversize bars with the clever use of removable rubber plugs. The bracket also allows for lateral adjustment of the lamp whilst riding. The 7.4v Li-ion battery pack is the same as the 2 LEDs 'Epic' version – with its 4 cells giving 5200 mAh. The battery has built in charge, discharge and short circuit protection. The connectors are fully sealed and totally waterproof (IP67). The light has a simple on/off/mode switch on the back. This has a new cycle program which turns the light on in 'low' mode and cycles through to the higher settings. This gives better control of the light in tricky situations when more light is needed quickly. In tests the Li-ion battery will last for up to 35hrs on low and 2hrs 15min on max, with the intelligent charger returning that in just 6 hours. The PVC case is small enough to fit under most stems, top tube junctions or slip into a hydration pack or jersey pocket. The 4 LED now utilises 'thermal throttling' techniques to increase the longevity of the LEDs and prevent damage to the electrical circuit due to overheating. This works by monitoring the temperature of the aluminium heatsink and restricting the power when it reaches a critical level, thereby keeping the casing at an acceptable temperature for handling while providing extended battery burn times by reducing the amount of energy lost through heat. As well as the universal handlebar clamp, a new reinforced nylon helmet mount is also included as well as ample velcro fastenings. This light is perfect for Endurance events, 12/24hr racing and night riding alike. It gives more light than you've ever had before with sensible run times and a low system weight. CNC machined in Barnoldswick, England Light Source: 4 x High Power LED Intensity: 960 Lumens – Max Beam: 3 x Spot (+/- 5 Deg), 1 x Flood (+/- 15 Deg) Mounting: Uni-Handlebar, Helmet, Head Harness Battery: 7.4v Li-Ion 5200mAh Charge Time: 6hrs Weight: 415g Power Levels: 4 (+ flash) Burn Time: 2 HR 15 MIN – 35HR+ Standard version includes 1 x 2 cell battery pack. In the box: Light 1 5200 mAh battery pack Handlebar mount Helmet mount Power lead Smart Charger with UK plug

Price: £269.1

Hope Vision 2 LED Front Light

Hope Vision 2 LED Front Light: The all NEW LED light – boasts some impressive features. Beautifully made, this tiny light packs a big punch with it's twin high power 5w LED's pushing out a maximum of 480 lumens. Standard version includes 1 x 2 cell battery pack. In tests the 7.4v Li-ion battery will last for a minimum of 1hr 45mins of burn time with the intelligent charger returning that in just 3 hours. Universal Mount: This mounts to the NEW universal handlebar clamp (std and oversize compatible) or the NEW helmet mount (both items supplied as standard, along with short and long connecting wires – no expensive add ons to upgrade!) The Small Li-Ion Battery Pack: (which is the same one found in the stem mounted light) is now held in a custom made neoprene soft pack. The battery has built-in charge, discharge and short circuit protection. The connectors are fully sealed and totally waterproof (IP67). The light has a simple on/off push switch on the back. The soft bag option is small enough to fit under most stems, top tube junctions or slip into a hydration pack or jersey pocket. Stem Mount: The 7.4v Li-Ion battery pack (is about the size of a mobile phone) sits unnoticed beneath the handlebar stem, in the same mounting bracket as the HID. The battery has built-in charge, discharge and short circuit protection. The connectors are fully sealed and totally waterproof (IP67). The light has a simple on/off/mode push switch on the back. The clip system holding the battery also allows for quick changes – ideal for Endurance racing or those longer winter rides when you don't want to be standing around getting cold and struggling with wires and fastenings. All housings feature excellent waterproof sealing. Note the stem is not included and must be bought separately. CNC machined in Barnoldswick, England Light Source: 2 x High Power LED Intensity: 480 Lumens – Max Beam: 2 x Spot (+/- 5 Deg) Mounting: Uni-Handlebar, Helmet, Head Harness Battery: 7.4v Li-Ion 2600mAh Charge Time: 3hrs Weight: 270g Power Levels: 4 (+ flash) Burn Time: 2 HR – 30HR+ Standard version includes 1 x 2 cell battery pack.

Price: £175.5

Hope Vision 2 LED Epic Front Light

Hope Vision 2 LED Epic Front Light: The all NEW LED light – boasts some impressive features. Beautifully machined, this tiny light packs a big punch with it's twin high power 5w LED's pushing out 480 lumens. Epic version includes 1 x 4 cell battery pack. In tests the 7.4v Li-ion battery will last for a minimum of 1hr 45mins of burn time with the intelligent charger returning that in just 3 hours. Universal Mount: This mounts to the NEW universal handlebar clamp (std and oversize compatible) or the NEW aluminium helmet mount (both items supplied as standard, along with short and long connecting wires – no expensive add on's to upgrade!) The Small Li-Ion Battery Pack: (which is the same one found in the stem mounted light) is now held in a custom made neoprene soft pack. The battery has built-in charge, discharge and short circuit protection. The connectors are fully sealed and totally waterproof (IP67). The light has a simple on/off push switch on the back. The soft bag option is small enough to fit under most stems, top tube junctions or slip into a hydration pack or jersey pocket. Our NEW universal handlebar clamp and helmet mount are both CNC machined to the same high standards the rest of our products achieve. No nasty plastic here! Ample velcro fastenings are also supplied. Stem Mount: The 7.4v Li-Ion battery pack (which complete with it's machined aluminium casing is about the size of a mobile phone) sits un noticed beneath the handlebatr stem, in the same mounting bracket as the HID. The battery has built-in charge, discharge and short circuit protection. The connectors are fully sealed and totally waterproof (IP67). The light has a simple on/off/mode push switch on the back. The clip system holding the battery also allows for quick changes – ideal for Endurance racing or those longer winter rides when you don't want to be standing around getting cold and struggling with wires and fastenings. All housings are CNC machined from solid aluminium billet and feature excellent waterproof sealing.Note the stem is not included and must be bought separately. CNC machined in Barnoldswick, England Light Source: 2 x High Power LED Intensity: 480 Lumens – Max Beam: 2 x Spot (+/- 5 Deg) Mounting: Uni-Handlebar, Helmet, Head Harness Battery: 7.4v Li-Ion 2600mAh Charge Time: 3hrs Weight: 405g Power Levels: 4 (+ flash) Burn Time: 2 HR – 30HR+ Epic version includes 1 x 4 cell battery pack.

Price: £192

Hope Vision 2 LED Endurance Front Light

Hope Vision 2 LED Endurance Front Light: The all NEW LED light – boasts some impressive features. Beautifully machined, this tiny light packs a big punch with it's twin high power 5w LED's pushing out 480 lumens. Endurance version includes 2 x 2 cell battery packs. In tests the 7.4v Li-ion battery will last for a minimum of 1hr 45mins of burn time with the intelligent charger returning that in just 3 hours. Universal Mount: This mounts to the NEW universal handlebar clamp (std and oversize compatible) or the NEW aluminium helmet mount (both items supplied as standard, along with short and long connecting wires – no expensive add on's to upgrade!) The Small Li-Ion Battery Pack: (which is the same one found in the stem mounted light) is now held in a custom made neoprene soft pack. The battery has built-in charge, discharge and short circuit protection. The connectors are fully sealed and totally waterproof (IP67). The light has a simple on/off push switch on the back. The soft bag option is small enough to fit under most stems, top tube junctions or slip into a hydration pack or jersey pocket. Our NEW universal handlebar clamp and helmet mount are both CNC machined to the same high standards the rest of our products achieve. No nasty plastic here! Ample velcro fastenings are also supplied. Stem Mount: The 7.4v Li-Ion battery pack (which complete with it's machined aluminium casing is about the size of a mobile phone) sits un noticed beneath the handlebatr stem, in the same mounting bracket as the HID. The battery has built-in charge, discharge and short circuit protection. The connectors are fully sealed and totally waterproof (IP67). The light has a simple on/off/mode push switch on the back. The clip system holding the battery also allows for quick changes – ideal for Endurance racing or those longer winter rides when you don't want to be standing around getting cold and struggling with wires and fastenings. All housings are CNC machined from solid aluminium billet and feature excellent waterproof sealing.Note the stem is not included and must be bought separately. CNC machined in Barnoldswick, England Light Source: 2 x High Power LED Intensity: 480 Lumens – Max Beam: 2 x Spot (+/- 5 Deg) Mounting: Uni-Handlebar, Helmet, Head Harness Battery: 7.4v Li-Ion 2600mAh Charge Time: 3hrs Weight: 280g Power Levels: 4 (+ flash) Burn Time: 2 HR – 30HR+ Endurance version includes 2 x 2 cell battery packs.

Price: £192

Hope Vision 1 LED Adventure Front Head Light

Hope Vision 1 LED Adventure Front Head Light: The 1 high powered LED pushes out 240 lumens on max power! This is the sort of output a lot of lights with many more LED's, bigger batteries and a greater cost can offer. Perfect for bikers, outdoor enthusiasts and people looking for a high quality, high powered light for other nocturnal activities! The CNC machined lamp body mounts at the front of the new head harness using the universal mount adaptor which allows full compatibility with all the mounting options across the range. The power is provided by 4 AA size batteries which are housed in a separate battery case allowing simple fitting to either the head harness or bike. The batteries can be of your choice, and we leave that up to you. As an example though, you can expect to get an average of 3 hours run time on max power from a typical rechargeable battery. The light has a simple on/off/mode switch on the top. This has a new cycle programme which turns the light on in 'low' mode and cycles through to the higher settings. This gives better control of the light in tricky situations when more light is needed quickly. Lights now include all our mounting options as standard. So you receive a QR handlebar mount, helmet mount and head harness allowing you to use the light in any situation, this makes the light truly adaptable. The head harness is now in use with many mountain rescue teams, fell runners and adventure racers. CNC machined in Barnoldswick, England Light Source: 1 x High Power LED Intensity: 240 Lumens – Max Beam: 1 x Spot (+/- 4 Deg) Mounting: Handlebar, Helmet, Head Battery: 4 x AA (not inc) Charge Time: n/a Weight: 220g, complete without batteries Power Levels: 4 (+ flash)

Price: £90

Hope Vision R4 LED Front Light

Hope Vision R4 LED Front Light: After two years of design and development the new Vision R4 LED lighting system has emerged as the ultimate multi-sport lighting system for a multitude of twilight activities. Standard version includes 1 x 2 cell battery pack. Combining the latest in LED technology, innovative new ideas in drive circuits, and the highest energy density battery cells available, the R4 weighs in at half the weight of its predecessor – the original Vision 4 – and is 30% smaller, without any loss in performance. In fact the R4 manages to kick out 1000 measured lumens, that's 65% more light output than the Vision 4. Hope have achieved this by designing the lamp around four Cree XPG LEDs, selecting the highest flux bin currently available, and controlling them with one of the smallest and most sophisticated, software based drive circuits ever created. The six power levels are split into two sequences – Race and Trail – each accessible by either a quick press or a press-and-hold of the power button from the off position. The two sequences mean improved usability. The Race sequence contains the three highest power levels, so switching from one level to another is faster and eliminates the need to pass through the lowest level, ideal for those times when maximum light is priority and battery life is not critical. The Trail sequence is there for extended periods of use when only a low level of light is needed but battery life is more of a consideration. The low power level is ideal for close contact use or to reduce glare when map reading. Trail sequence also contains the flash mode (which now pulses from dim to high) for times when ultra high visibility is required from long distance. The light is transmitted through the R4's highly efficient optic to create a diffused uniform light distribution across the entire beam angle with no intense hot-spot in the centre. Both laboratory and extensive field tests were carried out during the development on a range of optics to ensure that beam distance was not sacrificed while distributing the light as evenly as possible throughout the field of vision. The emphasis on the intelligent software within the 'brain' of the circuit allowed fewer hardware components on the PCB, reducing its size. A smaller PCB footprint meant more freedom in design when developing the compact CNC machined housing. The rugged and corrosion resistant anodised aluminium exterior has been extensively machined to create heat fins which maximise the surface area/ volume ratio to dissipate the heat as effectively as possible. Whilst every effort is made to dissipate as much heat as possible from the unit, we also wanted to keep the lamp compact and lightweight so in the higher power levels the housing temperature inevitably increases. Therefore, the circuit includes intelligent thermal management to prevent any permanent damage to the electronics. In most outdoor applications the lamp will operate comfortably, but if the natural airflow is reduced and the unit starts to overheat, the circuit will gradually restrict the supply of power to the LEDs in order to reduce the temperature. This also helps to prolong the battery life by reducing the amount of energy lost through heat. Light Source: 4 x Cree XPG, R5 Bin Light Output: 1000 measured lumens, 1446 generated lumens Beam: Diffused uniform beam (+/- 12.5°) Distance: 105m Mounting: New for 2011/2012 – CNC machined aluminium QR bayonet mount for handlebar, helmet or head Battery: 7.4v Li-Ion, 2600mAh Charge time: 3 Hours Weight: 235g (std) Power levels: 6 (two sequences of three), including flash Burn time: 1:15 hrs – 8:00 hrs Standard version includes 1 x 2 cell battery pack.

Price: £225

Hope Vision R4 LED Endurance Front Light

Hope Vision R4 LED Endurance Front Light: After two years of design and development the new Vision R4 LED lighting system has emerged as the ultimate multi-sport lighting system for a multitude of twilight activities. Endurance version includes 2 x 2 cell battery packs. Combining the latest in LED technology, innovative new ideas in drive circuits, and the highest energy density battery cells available, the R4 weighs in at half the weight of its predecessor – the original Vision 4 – and is 30% smaller, without any loss in performance. In fact the R4 manages to kick out 1000 measured lumens, that's 65% more light output than the Vision 4. Hope have achieved this by designing the lamp around four Cree XPG LEDs, selecting the highest flux bin currently available, and controlling them with one of the smallest and most sophisticated, software based drive circuits ever created. The six power levels are split into two sequences – Race and Trail – each accessible by either a quick press or a press-and-hold of the power button from the off position. The two sequences mean improved usability. The Race sequence contains the three highest power levels, so switching from one level to another is faster and eliminates the need to pass through the lowest level, ideal for those times when maximum light is priority and battery life is not critical. The Trail sequence is there for extended periods of use when only a low level of light is needed but battery life is more of a consideration. The low power level is ideal for close contact use or to reduce glare when map reading. Trail sequence also contains the flash mode (which now pulses from dim to high) for times when ultra high visibility is required from long distance. The light is transmitted through the R4's highly efficient optic to create a diffused uniform light distribution across the entire beam angle with no intense hot-spot in the centre. Both laboratory and extensive field tests were carried out during the development on a range of optics to ensure that beam distance was not sacrificed while distributing the light as evenly as possible throughout the field of vision. The emphasis on the intelligent software within the 'brain' of the circuit allowed fewer hardware components on the PCB, reducing its size. A smaller PCB footprint meant more freedom in design when developing the compact CNC machined housing. The rugged and corrosion resistant anodised aluminium exterior has been extensively machined to create heat fins which maximise the surface area/ volume ratio to dissipate the heat as effectively as possible. Whilst every effort is made to dissipate as much heat as possible from the unit, we also wanted to keep the lamp compact and lightweight so in the higher power levels the housing temperature inevitably increases. Therefore, the circuit includes intelligent thermal management to prevent any permanent damage to the electronics. In most outdoor applications the lamp will operate comfortably, but if the natural airflow is reduced and the unit starts to overheat, the circuit will gradually restrict the supply of power to the LEDs in order to reduce the temperature. This also helps to prolong the battery life by reducing the amount of energy lost through heat. Light Source: 4 x Cree XPG, R5 Bin Light Output: 1000 measured lumens, 1446 generated lumens Beam: Diffused uniform beam (+/- 12.5°) Distance: 105m Mounting: New for 2011/2012 – CNC machined aluminium QR bayonet mount for handlebar, helmet or head Battery: 7.4v Li-Ion, 2600mAh Charge time: 3 Hours Weight: 367g (endurance) Power levels: 6 (two sequences of three), including flash Burn time: 1:15 hrs – 8:00 hrs Endurance version includes 2 x 2 cell battery packs.

Price: £265.5